ЧП Ворон. Электронные компоненты и радиомонтажное оборудование. Микросхемы, транзисторы, реле, резисторы, конденсаторы, паяльное оборудование, припой.
Корзина пуста!
ВХОД ДЛЯ КЛИЕНТОВ

Забыли пароль?
Зарегистрироваться
Поиск:

Enter a search string or click on the microphone icon and begin speaking.

×
История запросов
ваша история поиска пуста
Whole catalog Measuring instrumentsMetal detectors, detectors of hidden wiring
 Electrical productsProtective devices
 Home and office suppliesSmart HouseVideo surveillance, security systems
Код товара:
045034

Сигнализатор отключения сети TELSY CP220 USB светозвуковой (без адаптера USB)

Detector for the loss and appearance of electricity in the 220V network. Powered by USB. Works without batteries and accumulators!
Сигнализатор отключения сети TELSY CP220 USB светозвуковой (без адаптера USB)
NOT available.
Expected price: 577,50 UAH
from 1 pc : 577,50 UAH
Prices are indicated at the time of product availability and may change upon receipt

Current balances:

NOT available

Изображение товара

Product description format_size zoom_out zoom_in

The TELSY CP220 USB light and sound detector is designed to signal the loss and appearance of voltage in the household AC 220 volt network.
For the device to work, you must turn it on to any 5 V power source with a USB connector. It can be an ordinary wall adapter for charging a mobile phone, even a low-power one, from an old mobile phone.
The detector does not have a battery or accumulator.
The device must be connected to the network for at least 10 minutes to bring it into a standby state. During this time, the device is charging, after which, in the event of a power failure in the socket, the detector may emit an intermittent high-pitched sound signal (beep) for at least 10 minutes.
At the end of the detector housing there is a three-position switch that sets the operating mode of the device.
  • position I - intermittent sound in the event of a power failure in the network
  • position II - constant sound when electricity appears in the network
  • position 0 - sound signal is disabled
A light indicator (red LED) is installed next to the switch and glows with a constant red glow when the supply voltage is applied in all positions of the switch, and also flashes when the mains voltage fails. The flashing of the LED allows you to find the device in total darkness even after some time after disconnecting it from the mains adapter.

Features:
  • supply voltage: 5 VDC
  • charge time to beep : ~ 15 min (minimum)
  • buzzer time when power off: 10 minutes (minimum)
  • maximum current consumption: 300 mA (by power output 5V after switching on for no more than 1 minute)
  • overall dimensions: 62 x 34 x 16 mm
  • weight: 30 g (without power supply)
Device contents:
  • light and sound detector - 1 pc

Leave your feedback or ask a question

Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.

The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.

If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав unknown