Drill stand BG-6127 [tripod, swivel head]

Зображення товару

Product description format_size zoom_out zoom_in

Also, on its cast-iron bed, which has a size of 150 by 150 mm, thanks to the technical holes, any vice can be securely fixed. The frame itself can also be fixed on the surface with four technical holes.

The stand-pipe with a diameter of 25 mm has a wall thickness of 1.6 mm and a height of 40 cm, it is attached to the frame with two screws, which allows you to set the angle of 90 degrees quite accurately.

The "head" of the rack can be fixed at any height, and the plastic limiter will not allow it to fall below the level you set. The maximum drilling depth is 60 mm.

The stand is very easy to use and will be a reliable assistant when drilling not only vertical holes, but also, of course, will make it possible to drill a hole at a certain angle you need.

It almost completely eliminates backlash in the drill, which significantly increases the accuracy of the hole made, minimizing the error. In addition, working with such equipment saves a lot of time and effort, thanks to the gear mechanism and a fairly long lever.

And its adjustable drilling depth limiter will be useful for those who have to do the same type of work.