Laser level Huepar 3641G, 5 lines, in bag

Зображення товару

Product description format_size zoom_out zoom_in

The body of the level is placed on a rotary base. The base, in turn, is placed on 3 racks. The angle of rotation of the body is 360 degrees. For more precise adjustment of the angle of rotation, there is a swivel screw on the bed.

To turn on the level, connect the power to it and turn the switch on the side wall to the "ON" position. Accordingly, to turn off, turn the switch to the "OFF" position. After switching on, the device will emit a sound signal, which means that you can start working with the level. Also, after turning the switch to the "ON" position inside the device, the pendulum is unlocked for self-leveling. It is recommended to lock the pendulum during transportation of the level to avoid damage (turn the switch to the "OFF" position).

To enable/disable the laser lines on the upper part of the body there are buttons "V" - vertical lines and "H" - horizontal lines. The level can simultaneously project 5 lines (4 vertical and 1 horizontal) and 6 points (5 points on the lines and a plumb line). After pressing the "V" button, 2 vertical lines are turned on, after pressing the button again, 2 more lines are turned on. Pressing the "V" button a third time turns off the vertical lines. A horizontal line is projected through the window on the front of the case. There is also an indicator on top of the case, which, after turning on the power, lights up in green and a water level to check the levelness of the level installation. To fine-tune the level, you need to twist the tripod legs on which the device is placed. If the level is installed at an angle, the device will emit a sound signal.

The level supports work with special receivers (not included in the kit). This operating mode is used to operate in bright light conditions, mainly outdoors during the day. To activate the mode, use the "OUTDOOR" button, which is located on the upper part of the body.

At the bottom of the body there is a hole with a 5/8 "thread for mounting on a tripod. A plumb point is also projected through this hole.

For the convenience of carrying the level during operation, a strap is attached to the body of the device.

This level uses a green laser class 2. The laser wavelength is 505-520 nm, and the laser power is 1 MW.

When working with the level, special glasses with green "glass" are also used. Thanks to these glasses, the distance at which the beams are in good visibility is increased. The glasses also serve to protect the retina of the eyes from the effects of the laser.

A plastic case is used to transport the level. Inside the case is equipped with foam inserts for safe transportation of the device. There is also a shoulder strap for carrying the case. The strap is attached to the hinges on the side walls of the case.

Package contents:

• Level - 1 pc.
• Battery - 2 pcs.
• Charger - 1 pc
• Glasses with green lenses - 1 pc.
• Bag - 1 pc.