Current Clamp MESTEK CM83C, true RMS

Зображення товару

Product description format_size zoom_out zoom_in

• True-RMS. 
• Automatic vibration mіzh vimіryuvannya
• Zachist from re-entangling in case of vimiryuvanna
• Rіdkokrіstalevіy display
• The maximum display is 9999
• The image on the display is updated 3 times per second
• Automatically Connected after 15 minutes
• Supplement about malium battery charge
• NCV- The function of contactless presence of the presence of the springs
• RCD- Residual current devices
• LoZ- Low impedance test function
• INRUSH- Function of activation of start-up strum in the mode of change of strum
• temperature change
• VFD- The function of changing the reference value of the stress in the presence of the frequency

• Zminny strum: 9.999A/100A/600A, Rozdilna zdatnist 0.001A/0.1A ±(2.5%+6 digits) /(3.0%+6 digits)
• Stress struma: 1V - 600V, Rozdilna zdatnist 0, 1V ±(0.8%+3 signs)
• The stress of the wicked struma:1V - 600V, Rozdilna building 0.1 ±(0.8%+5 digits)
• Opir: 100 Ohm/1 kOhm/10 kOhm/100 kOhm/1 MOhm/10 MOhm/100 MOhm, Rozdilna building 0.1Ohm/1Ohm/10Ohm/0.1 kOhm/1 kOhm/10KOhm/100 kOhm ±(1.0 %+3 digits)
• Mn_st: 10 nF/100 nF/1 μF/10 μF/100 μF/1000 μF/60 mF, Rozdilna building 0.001nF/0.01nF/0.001μF/0.01μF // 0.1μF/1μF/10μF ±(3 , 5%+5 digits)
• Temperature: -20°C - 1000°C, Industrial building 1°C ±(2%+2 digits)
• Buzzer: if Opir is less than 50 Ohm - sound signal
• Living: 1.5V (AAA) x 2 (included)
• Compliant with IEC-61010-1 standards
• Klas zahistu vid overstrain 2020 CAT III 600 V