ЧП Ворон. Электронные компоненты и радиомонтажное оборудование. Микросхемы, транзисторы, реле, резисторы, конденсаторы, паяльное оборудование, припой.
Корзина пуста!
ВХОД ДЛЯ КЛИЕНТОВ

Забыли пароль?
Зарегистрироваться

Шановні клієнти інтернет-магазину!

  У зв'язку зі святкуванням Нового Року ми працюємо за наступним графіком:
• з 31.12.24(Вт) по 02.01.25(Чт) не працюємо
• з 03.01.25(Пт) працюємо в звичайному режимі.

  Інтерет-магазин приймає замовлення цілодобово 24/7 !



Поиск:

Enter a search string or click on the microphone icon and begin speaking.

×
История запросов
ваша история поиска пуста
Whole catalog Development tools3D printers&CNC3D Printer Components
Код товара:
039837

Module DUAL VNH2SP30 30A 20KHz PWM Motor Driver

Driver for two brushed motors based on VNH2SP30 microcircuits
Module DUAL VNH2SP30 30A 20KHz PWM Motor Driver
NOT available.
Expected price: 504,00 UAH
from 1 pc : 504,00 UAH
from 3 pcs : 478,80 UAH ( -5,0%)
from 10 pcs : 428,40 UAH ( -15,0%)
Prices are indicated at the time of product availability and may change upon receipt

Current balances:

NOT available

Изображение товара

Product description format_size zoom_out zoom_in

This motor driver module perfectly replaces the L298 H-bridge with a pair of VNH2SP30 full-bridge drivers. The module is capable of driving a pair of high-current motors. VIN pins and motor output are sized for 5mm screw terminals, making larger wire sizes easier to connect.

Note: When using this board in extremely high power designs, it may be necessary to improve thermal performance with a heatsink or fan and solder the wires directly to the board instead of using a screw terminal. However, when using the board at currents up to 6A, the microcircuits will hardly noticeably heat up.
 

Main characteristics:

  • Supply voltage: 5.5-16V
  • Rated current (continuous): 14 A
  • Maximum current (short-term): 30 A
  • MOSFET On Resistance (min.): 19 mΩ (per leg)
  • Maximum PWM frequency: 20KHz
  • overheat protection
  • Shutdown at undervoltage and overvoltage
  • Current measurement available for analog pin of microcontroller or Arduino

Schemes and documentation:

Предлагаемые замены

Leave your feedback or ask a question

Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.

The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.

If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Денис - Днепр unknown