ЧП Ворон. Электронные компоненты и радиомонтажное оборудование. Микросхемы, транзисторы, реле, резисторы, конденсаторы, паяльное оборудование, припой.
Корзина пуста!
ВХОД ДЛЯ КЛИЕНТОВ

Забыли пароль?
Зарегистрироваться
Поиск:

Enter a search string or click on the microphone icon and begin speaking.

×
История запросов
ваша история поиска пуста
Whole catalog Autochemistry
Код товара:
039245

Muffler Cement Sealant ABRO ES-332 for exhaust system repair 140g

High temperature reinforced cement muffler. For the repair of automobile exhaust systems. Tuba 170 g.
Muffler Cement Sealant ABRO ES-332 for exhaust system repair 140g
Manufacturer: ABRO
NOT available.
Expected price: 233,50 UAH
from 1 pc : 233,50 UAH
from 3 pcs : 226,50 UAH ( -3,0%)
from 6 pcs : 221,80 UAH ( -5,0%)
Prices are indicated at the time of product availability and may change upon receipt

Current balances:

NOT available

Technical documentation

Изображение товара

Product description format_size zoom_out zoom_in

The sealant is intended for the assembly of sealed joints in exhaust systems, the elimination of small holes and cracks in mufflers, exhaust pipes, catalytic converters, resonators, etc. Suitable for exhaust pipes with and without a catalyst.
It can also be used in other branches of technology, where high-temperature components are required to be sealed.

Properties:
 
• provides reliable sealing of joints
• retains its properties at temperatures up to 1100°С
• safe for catalysts
• can be used in everyday life as a high-temperature glue

Assembling new connections:
1. Apply 6mm thick compound to the inner and outer ends of the muffler or exhaust pipe.
2. Carry out a normal assembly.
3. Seal all joints with cement.
 
Repairs:
1. Clean surfaces from oil, scale, grease and rust.
2. Apply the required amount of cement and seal holes and cracks. When sealing extensive damage, it is recommended to reinforce the outside of the repaired area with a metal or fiberglass mesh.
The cement setting takes place after 20 minutes of idling, complete hardening after 2-4 hours. Without heating, the cement polymerizes within 12 hours.
 
Composition: sodium silicate, water, aluminum silicate.

ATTENTION!Irritating! Avoid contact with eyes and prolonged skin exposure. In case of contact with eyes or skin, rinse thoroughly with water. If swallowed, consult a doctor. PROTECT FROM CHILDREN!

Leave your feedback or ask a question

Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.

The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.

If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав unknown

Buy with this product: Посмотреть больше…