ЧП Ворон. Электронные компоненты и радиомонтажное оборудование. Микросхемы, транзисторы, реле, резисторы, конденсаторы, паяльное оборудование, припой.
Корзина пуста!
ВХОД ДЛЯ КЛИЕНТОВ

Забыли пароль?
Зарегистрироваться
Поиск:

Enter a search string or click on the microphone icon and begin speaking.

×
История запросов
ваша история поиска пуста
Whole catalog Materials for production and repairAdhesives, sealants, pastes, scotch tapeSealants, compounds, thermoplastics
Код товара:
038457

Silicone sealant heat-resistant А1853, 1300°С, 300 ml, gray

High-temperature sicon adhesive sealant, 300 ml, 1300°C
Silicone sealant heat-resistant А1853, 1300°С, 300 ml, gray
Manufacturer: Ausbond (China) Co., Ltd. (AUSBOND)

Deliveries terminated.


from 1 pc : 1 599,00 UAH

Изображение товара

Product description format_size zoom_out zoom_in

One-component high temperature flame retardant sealant is applied in industrial boilers, industrial electrode furnaces, for repairing and filling high temperature places such as fireplaces, stoves, chimneys, high temperature pipelines, ovens, bakeries, etc. Bonding, sealing and repairing high temperature equipment, fireproofing engineering tunnels, Bonding and sealing industrial products such as pipes for engineering and industrial equipment.
 
Features:

Viscosity (at 25°C): 8000 ~ 12000
Relative density (g/cm3, 25 ℃): 1.65
Surface Drying Time (min, 25 ℃): 5 ~ 15
Full cure time (days, 25 ℃): 3 ~ 7
Hardness (Shore A): 95
Tensile Strength (MPa): 1
Peel strength (N/mm): 6
Shear strength (MPa): ≥ 1.2
Working temperature range (℃): -60 ℃ ~+1300 ℃
Volume resistance (Ohm • cm): ~ 3.0 × 1015
Dielectric strength (kV/mm): ≥20
Dielectric constant (1.2 MHz): 3.88
 
Application rules:

1. Clean surfaces, remove rust, dust, oil.
2. Cut off the nozzle cap, install the cut off the tip
Use a glue gun to apply the sealant evenly.
Press down the surfaces to be glued.
3. Let it dry naturally at room temperature for 30 ~ 60 minutes
Then heat the bonding area to 80 ~ 120 ℃
2 hours, wait for the bonded area to cool slowly, and leave at room
temperature for 8 ~ 24 hours.
full cure time is usually 3 ~ 7 days (at 25 ℃)
A lower temperature will also extend the cure time.
4. Recommendation: Do not move or use until the sealant is completely dry.

Store in a cool and dry place and make sure it is out of reach of children. After completion of the operation, unused adhesive should be sealed immediately.
This product is mildly irritating to the skin and eyes, if it accidentally comes into contact with the skin, wipe with a clean cloth, then rinse with water, if accidentally splashed into the eyes, use a clean cloth and rinse with water and consult a doctor for examination.

Leave your feedback or ask a question

Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.

  • Влад 13:57 29.09.2021 share

    Добрый день.Подскажите, пожалуйста, сохраняет ли эластичность этот герметик после отверждения?

    Is the review helpful?
    • 1 (Менеджер интернет-магазина) 14:23 29.09.2021 share

      Доброго дня!

      Я не можу відповісти на це питання, бо ми не перевіряли даний герметик ні за якими параметрами в звязку з його достатньо великою ціною. Все що вказав виробник написали в описі до товару.

      Is the review helpful?
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.

If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Вячеслав unknown