Drill size:
-
diameter D: 2.60 mm
-
full length L: 55 mm
-
spiral length F: 25 mm
-
sharpening angle: 135°
Twist drill from high-speed tool steel HSS-Co M35 according to DIN 338 (domestic steel marking - P6M5K5).
Complies with GOST 10902-77.
The high content of Co cobalt in the alloy (about 5%) significantly increases the performance and durability of the drill, even when compared to a titanium coated surface. Alloying with cobalt also increases the red hardness (the ability to withstand overheating without degrading properties).
Without additional reinforcing coating.
Right-hand cutting, sharpening 135 °, i.e. for hard materials.
Sanded.
Two cutting edges, two spirals.
The shank diameter matches the drilling diameter.
The 135°angle sharpener defines the recommended application for drilling the following materials:
-
alloyed and unalloyed steel
-
non-ferrous metals
-
cast iron of different grades
-
cermets
-
hard plastic, including fiberglass
Specifications:
-
drill type: twist
-
direction of rotation: right hand
-
sharpening angle: 135°
-
steel grade according to DIN: HSS-Co M35
-
steel grade according to GOST: Р6М5К5
-
cobalt content: ~ 5%
-
surface hardening coating: no
-
color: dark bronze
Warning!
Drilling of stainless steel must be done at the required drilling speeds, it is imperative to use coolant (cutting fluid). The use of coolant on any metal increases the drill life many times over.