The radio equipment installer's desk is designed for high-quality and efficient organization of the radio installer's workplace during the production, repair of radio-electronic and electrical products, as well as an electrician's desk. This activity requires increased precision and attention. If safety standards are not followed, there is a risk of injury. Using the timeline optimizes work by creating a functional space for the master. It conveniently houses tools, work items and auxiliary equipment, so the equipment is always at hand.
The frame of the assembly table is made of a steel profile with a thickness of 2 mm, which gives the radio installer's table rigidity and stability and provides electrical contact on all parts. For painting, a polymer-powder coating is used, which provides resistance to adverse factors. The surfaces do not rust, the gray paint does not fade over time.
Frame height 725mm. If the surface on which the table is located has slight irregularities, then using screw-in plastic supports with thrust bearings, you can align the tabletop strictly horizontally. Also, with the help of supports, you can slightly increase the height of the table by 5-10mm.
The depth of the frame is 650mm and is due to the long base of the supports. The table has a comfortable approach and the foot does not touch the base due to the fact that the depth of the base of the legs is less than the depth of the table top.
Frame width 1220mm. Massive profile-box, connecting two supports, has functional openings with a diameter of 23 mm. The internal dimensions of the profile-box are 115x92mm, the skirt is 15mm at the top and bottom, the length of the box is 1170mm. Inside the box, you can run power cables, sockets, circuit breakers. Also in the middle there is a retaining post under the table top to prevent it from bending.
The table top of the installer's desk is made of chipboard, painted gray and edged with plastic molding. The depth of the table is 750mm, the width is 1380mm. This is the optimal size to accommodate most of the master fixtures. The thickness of the table top is 25mm, which ensures its sufficient strength.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.