Fast curing, requires less than 15 minutes to bond (full strength is achieved within 24 hours at 25°C).
High bond strength, recommended for threads from M6 to M36.
Well protects threads from corrosion.
Recommended for auto and motor vehicles.
Features:
-
maximum thread size: up to M36
-
degree of fixation: high
-
breakaway torque of M10 bolts: 20 Nm
-
average breakdown torque: 15 Nm
-
range working temperatures: -54°C+149°
-
maximum thickness of the joint filling: 0.13 mm
-
package volume: 10 ml
Testing Item: |
K-0262 Thread Locker Adhesive |
Main ingredient: |
epoxy resin methacrylic |
Appearance: |
red liquid |
specific gravity: |
1.05g/m3 |
Viscosity: |
thixotropic, in 1000~2000mPas |
Flash Point: |
>108°c |
Prevail Torque: |
15 N.m |
Break torque: |
20 N.m |
Working temperature: |
-54~+149°C |
Room Cure time(at 25°c): |
15 minutes(initial cure time)
24 hours (full cure time)
|
Max filling: |
0.13mm |
Reference information:
Anaerobic sealants and adhesives are a special class of acrylic adhesives, which are liquid compositions of various viscosities that can be stored for a long time (≥1 year) in a thin-walled oxygen-permeable polyethylene container without changing their properties and cured at a temperature of 15 - 25°С in narrow metal gaps (in pores, threaded, flanged and cylindrical joints) with the formation of a strong polymer layer.
One-component anaerobic adhesives and sealants for metal joints fixed comfort, fasten and seal quickly, reliably and economically all types of threaded, cylindrical and pipe connections.
The adhesive fixer completely fills the thread gap and thus creates maximum contact with the surface.
Anaerobic the adhesive is ideal for fixing, securing and sealing screws Bearings, couplings, bolts and other planing parts in running and press fits will be reliably fixed.
The curing process begins only when there is contact with metal at the place of fixation and not air admission.
Anaerobic adhesive remains liquid as long as oxygen is available.
Disadvantages of anaerobic adhesive sealant: if a strong fixing compound is used, special tools or heating must be used during dismantling.