Fast curing, requires less than 20 minutes to set (full strength is gained within 24 hours at 25°C).
Medium strength, recommended for small threads up to M12, as well as for long threads parts. If necessary, the connection can be easily disassembled.
Characteristics:
-
Maximum thread size: up to M12
-
color: blue
-
degree of fixation: medium
-
breakaway torque of M10 bolts: 8 Nm
-
operating temperature range: -54°C+149°C
-
package volume: 50 ml
Testing Item: |
K-0222 Anaerobic Thread Sealant |
Main ingredient: |
epoxy resin methacrylic |
Appearance: |
blue liquid |
specific gravity: |
1.05g/m3 |
Viscosity: |
thixotropic, in 1000~5000mPas |
Flash Point: |
>108°c |
Prevail Torque: |
4 N.m |
Break torque: |
8 N.m |
Working temperature: |
-54~+149°C |
Room Cure time(at 25°c): |
≤20 minutes(Initial cure time)
24 hours (Full cure time)
|
Max filling: |
0.13mm
|
Reference information:
Anaerobic sealants and adhesives are a special class of acrylic adhesives, which are liquid compositions of various viscosities that can be stored for a long time (≥1 year) in a thin-walled oxygen-permeable polyethylene container without changing their properties and cure at a temperature of 15 - 25°C in narrow metal gaps (in pores, threaded, flanged and cylindrical joints) with the formation of a strong polymer layer.
One-component anaerobic adhesives and sealants for metal joints fix, fix and seal quickly , reliably and economically all types of threaded, cylindrical and pipe connections.
Anaerobic adhesive completely fills the thread gap and thus creates maximum contact with the surface.
Anaerobic adhesive is ideal for fixing, securing and sealing screws Bearings, couplings, bolts and other jointing parts in running and press fits will be reliable hardened.
The hardening process begins only when there is contact with metal at the place of fixation and there is no access to air.
Anaerobic glue remains liquid as long as oxygen is available.
Disadvantages of anaerobic adhesive sealant: in case of using a strong fixing compound, special tools or heat must be used during dismantling.