Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
Colloidal graphite-based conductive varnish. To create and restore a conductive coating in electroplating, when repairing electronic equipment. Spray 200 ml.
The product is easy to apply and adheres firmly to the treated surfaces, including those as smooth as glass. Excellent adhesion to smooth surfaces such as glass and plastics. Remains effective at temperatures up to+300°C.
Coating resistivity 1000-2000 Ohm/m2, depending on the thickness of the applied varnish layer.
Properties:
black color
density: 0.88 g/cm³
interlayer drying time: at room temperature after 10 minutes dries until it comes off
complete drying time: after 24 hours dries completely
heat resistance: up to+300°С
surface resistance: 1000-2000 Ohm/m2
Appointment
in preparation for galvanic coating of products made of non-conductive materials to create a surface conductive layer
when repairing picture tubes, cathode-ray tubes, it is used to repair damage to the conductive coating of the cone
protection against electrostatic discharge 9creation of an equipotential surface).
Directions for use
Shake the can well before use. The surface to be protected must be free from dirt and grease.
Spray the aerosol from a distance of approximately 40 cm. Repeat the application two or three times to obtain a thicker layer.
The clogged nozzle is washed with a solvent.
Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown