ЧП Ворон. Электронные компоненты и радиомонтажное оборудование. Микросхемы, транзисторы, реле, резисторы, конденсаторы, паяльное оборудование, припой.
Cart is empty!
CUSTOMER LOGIN

Forgot your password?
Register
Search:

Enter a search string or click on the microphone icon and begin speaking.

×
История запросов
ваша история поиска пуста
Whole catalog Materials for production and repairAdhesives, sealants, pastes, scotch tapeSealants, compounds, thermoplastics
Product code:
017400

Silicone sealant ZR736 (310ml, tube) neutral, TRANSPARENT

Acid-free silicone adhesive sealant for PCB protection and other electronics assemblies from external influences. Dielectric, waterproof, heat resistant.
Silicone sealant ZR736 (310ml, tube) neutral, TRANSPARENT
Manufacturer: Shanghai Jorle Fine Chem. Co., Ltd. (JORLE)

Deliveries terminated.


from 1 pc : 323,80 UAH
from 3 pcs : 307,60 UAH ( -5,0%)
from 10 pcs : 291,40 UAH ( -10,0%)

Product picture

Product description format_size zoom_out zoom_in

Silicone adhesive sealant is designed for gluing and sealing electronic components, assemblies and blocks, product cases (“liquid gasket”). Provides dielectric insulation, prevents aggressive environmental influences.
Elastic, shock and vibration absorbent.
Resistant to ultraviolet radiation, can be used to seal solar panels, solar collectors.
Retains its mechanical and dielectric properties in wide temperature ranges, from -60C to +260 ℃.
Not flammable.
Chemically neutral, acid-free and therefore non-corrosive to bonded surfaces.

Curing of one-component silicone compounds occurs due to interaction with moisture contained in the air. They cure well at room temperature in the range of relative humidity from 30% to 80%. The level of about 90% of the values ​​of their physical properties is reached within 24 to 72 hours. It is possible to accelerate the curing of the composition with a slight heat, not higher than 60°C.
Accordingly, silicone sealants should be stored in a sealed container, avoiding contact with air.
When working with adhesive-sealant, the time for applying the silicone paste is limited. Typically, this period ranges from several minutes to one hour before the start of the formation of the surface film, which impairs adhesion.
It is undesirable to use a one-component compound in confined spaces or apply in a thick layer, because in this case, the curing period is significantly increased.

Specifications:
(under conditions t = 25°C, relative humidity 55%, after curing within 7 days)



Color transparent
Shorr hardness, units 40-50
Drying time to touch: min (at 25 ℃, 55% RH), minutes 5-10
Elongation at break,% >150
Tensile strength, MPa, >0,8
Shear strength MPa, iron/iron ≥ 1,2
Electric strength, kV/mm (25 ℃) ≥ 20
Loss factor (1 MHz) (25 ℃) 0,001
Dielectric constant (at 1 MHz, 25 ℃) 2,98
Resistivity (at VDC 500V) Ω cm 5.00E +14

Leave your feedback or ask a question

Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.

The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.

If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав unknown

Buy with this product: View more…