Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
OS: Windows98, Windows Me, Windows NT, Windows 2000, Windows XP, VISTA
23 measurement functions, self-test.
Average waveform, intensity, inverting, emulation of electronic phosphor, addition, subtraction, multiplication, division, X-Y graph.
Saving the signal in the following formats: text, jpg/bmp, MS excel/word file.
FFT
Multiple devices can be connected to one computer
Labview \ VB \ VC \ Delphi \ C ++ Builder support
Attention! When measuring voltage, set the attenuator correctly on the probe! Too much measured voltage will damage the instrument and endanger you and the connected computer. Do not measure voltage over 35V in 1X probe mode!
Completeness:
Packing Oscilloscope
Probes - 2 pcs USB - connector
Drivers and Software User Manual (EN)
Device characteristics.
Channels
2
Impedance
1 Megaohm 25pF
Modes
AC/DC/GND
Vertical Resolution
8 bit **
Ranges
10mV-5V, 9 steps
DC Accuracy
±3%***
Time ranges
4 ns-1 h, 38 steps
Vertical position control
Yes
Login protection
Diode
X-Y
Yes
Auto tuning
Yes (30Hz to 40MHz)
External trigger input (EXT)
Yes
Trigger modes
auto, normal, single
Trigger slope
+/-
Trigger level control
Yes
Trigger types
On a rising front, on a falling front
Trigger source
channel 1 (CH1), channel 2 (CH2), external (EXT)
Pre-post-trigger
0-100%
Buffer size
10 KB - 32 KB per channel
Bandwidth
up to 40MHz
Sampling rate (samples per second)
100 MHz (100 MSa/s) in single channel mode
50 MSa/s with 2 channels.
Sampling selection
Yes
Vertical mode
CH1, CH2, Double, Add
Cursor measurements
Yes
** The number of effective bits depends on the signal frequency.
*** Based on the full measuring range (Volt/division * 8 divisions)
Software
The program can be downloaded without purchasing an oscilloscope in order to evaluate its work in demo mode.
The warranty period for HANTEK oscilloscopes is 3 months to detect factory defects.
Leave your feedback or ask a question
Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.
Добрый день! Это модель осциллографа разрабатывалась ещё несколько лет назад, когда Windows 10 ещё не существовала. На 7-ке должна работать. Проверим, сообщим дополнительно.
Проверили - работает с Windows 10. Устанавливать надо в режиме совместимости с Windows XP.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown