OBD-2 scanner ELM327 communicates with any car that supports OBD II specifications, regardless of the communication protocol and car brand. As a rule, these are all American cars produced since 1996 and European ones since 2001, diesel since 2004.
The adapter is compatible with many diagnostic programs.
Despite the appearance of many modifications of autoscanners with a wireless interface (Bluetooth and WiFi), a cable connection to USB remains relevant as the most trouble-free, reliable and cheap solution.
ELM327 features:
-
- Reading errors and their decoding (DTC memory)
-
-
-Erasing errors (extinguish the MIL light - Check Engine)
-
-
-Read parameters in real time:
-
-
-Engine RPM
-
-
- Engine load
-
-
-Coolant temperature
-
-
-Fuel system condition
-
-
- Vehicle speed
-
-
-Short term fuel consumption
-
-
-Long term fuel consumption
-
-
-Absolute air pressure
-
-
-Ignition advance
-
-
-The temperature of the intake air
-
-
-Mass air flow
-
-
-Throttle position
-
-
-The Lambda probe
-
-
-Fuel pressure
-
-
- And more - depends on the specific car ...
-
-
-Diagnose ABS (brakes) and automatic transmission (gearbox) - not on all models
-
-
-Plotting charts
-
-
-Read the VIN number of the body
-
-
- Acceleration time up to 100 km/h
.... And more - depends on the specific program.
EOBD specifications include automatic transmission and ABS, but these are optional - so car manufacturers support them at their discretion.
Description:
16 pin OBDII connector, inside the connector housing is an adapter board. On the back of the connector is a USB cable, 1.3 m long.
Mode LEDs: OBD Tx/Rx, USB Tx/Rx, Power
Operating voltage: 12V (from the vehicle's on-board network), Current consumption: 50mA
Data rate: 38400 kbps
Completeness of delivery:
-
Adapter ELM327 in a plastic case
-
CD with drivers
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
