The multimeter allows you to measure the following parameters:
- direct and alternating current (up to 20 A)
- constant and alternating voltage
- resistance
- capacity
- frequency
- temperature
Also available:
-
audible chain ringing
-
pn junction testing (diode test)
-
testing of transistors.
Convenience in work will be provided by the following functions:
-
Data Hold
-
automatic power off in case of prolonged absence of measurements ("sleep mode").
To monitor the state of the battery, a low battery level indication is provided.
A cover made of elastic plastic around the perimeter of the device protects it from mechanical damage.
When the measurement modes are selected, the corresponding sockets for connecting measuring probes are indicated on the indicator of the device.
Display:LCD, 60 x 54 mm, maximum bit depth - 19999
Constant voltage (DC), V:200mV/2V/20V/200V/1000V accuracy ±(0.05%+3)
Alternating voltage (AC), V:2V/20V/200V/1000V accuracy ±(0.5%+10)
Direct current (DC), A:2mA/200mA/20A accuracy ±(0.5%+5)
Alternating current (AC), A:20mA/200mA/20A accuracy ±(0.8%+10)
Resistance, Ohm:200Ω/2kΩ/20kΩ/2MΩ/200MΩ accuracy ±(0.5%+10)
Capacity, F:2nF/20nF/2μF/20μF accuracy ±(3%+40)
Frequency Hz:20kHz accuracy ±(1.5%+5)
Temperature, C:-40 C to 1000 C accuracy ±(1%+30)
Sampling rate:2-3 times/second
Food:9V battery "Krona"
Dimensions:179 x 88 x 39 mm
Weight:350 grams.
Accessories included:measuring probes, K-type thermocouple with open junction ("ball").
_250x281.jpg)
Инструкция по эксплуатации на английском языке
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
