UNI-T current clamps UT203+ [DC, True RMS]

Изображение товара

Product description format_size zoom_out zoom_in

Current clamp UT203+ manufactured by UNI-T.
Automatic selection of measurement limits (except for current measurement modes) and auto-shutdown mode.
Measurement method: true root mean square (True RMS).
There is a non-contact voltage detection (NCV) function.
The maximum diameter of cable coverage with measuring clamps is 28 mm.
Display type - LCD, bit depth - 3999,  updating data on the display 3 times per second.

Measurement functions:
- direct and alternating voltage (contact method, through probes)
- direct and alternating current (non-contact method)
- frequency
- duty cycle
- chain continuity test for open circuit (sound indication)
- diode test (checking p-n junction

Measuring range selection is automatic.

Additional functions:
- storing display readings (Data Hold)
- relative calculation mode
- sleep mode (automatic shutdown if there is no measurement for a long time)
- low battery indicator
- NCV non-contact AC voltage detection

Measuring ranges:
- constant voltage: 400mV/ 4V/ 40V/ 400V/ 600V;
- alternating voltage: 4V/ 40V/ 400V/ 600V;
- DC: 40A/ 400A;
- alternating current: 40A/400A;
- resistance: 400 Ohm/4 kOhm/40 kOhm/400 kOhm/4 Mohm/40 Mohm.
- frequency range: 10Hz - 1MHz.
- capacitor capacity: 40nF - 40000uF.
Batteries:  AAA batteries, 2 pcs.
Dimensions: 210 x 75.6 x 30mm.
Display dimensions: 35.6 x 18mm.
Product weight: 200g.

Compliance with electrical safety standards IEC 61010 CAT II 600 V, CAT III 300 V

Соответствие стандартам электробезопасности IEC 61010 CAT II 600 В, CAT III 300 В