ЧП Ворон. Электронные компоненты и радиомонтажное оборудование. Микросхемы, транзисторы, реле, резисторы, конденсаторы, паяльное оборудование, припой.
Кошик порожній!
ВХІД ДЛЯ КЛІЄНТІВ

Забули пароль?
Зареєструватися

Шановні клієнти інтернет-магазину!

  У зв'язку зі святкуванням Нового Року ми працюємо за наступним графіком:
• з 31.12.24(Вт) по 02.01.25(Чт) не працюємо
• з 03.01.25(Пт) працюємо в звичайному режимі.

  Інтерет-магазин приймає замовлення цілодобово 24/7 !



Пошук:

Enter a search string or click on the microphone icon and begin speaking.

×
История запросов
ваша история поиска пуста
Whole catalog Power suppliesBattery chargersLead acid battery chargers
Код товару:
010960

Charger MW 70A 12V [3-mode]

The auto-start-charger (ROM) is designed for automatic charging of 12-volt all types of lead-acid batteries with a capacity of 7-500 A * H in automatic mode, as well as non-automatic alkaline batteries (with battery temperature control).
Charger MW 70A 12V [3-mode]
Manufacturer: MASTER WATT (MW)
NOT available.
Expected price: 3 045,00 UAH
from 1 pc : 3 045,00 UAH
from 2 pcs : 2 984,00 UAH ( -2,0%)
from 4 pcs : 2 923,00 UAH ( -4,0%)
Prices are indicated at the time of product availability and may change upon receipt

Current balances:

NOT available

Зображення товару

Product description format_size zoom_out zoom_in

The device can be used as a starting device directly on the car, providing a quick charge of the battery and the subsequent start of the car starter.

ROM can provide high, long-term charging current (up to 40A) with low fluctuations (high fluctuating current at the output of most transformer chargers heats the battery and leads to premature wear of the positive electrode).
The ROM has a smooth current regulator that allows you to set the current from 1 to 30 Amperes, and the value of the charging current will not depend on voltage fluctuations in the 220 Volt network.

All three charging modes have two stages:

1st stage is the main one - charging up to 80%, when the current hardly changes;
2nd stage saturation - ROM reduces the current, and the voltage is maintained at a given level.
Three charging modes allow you to charge any type of battery at different ambient temperatures, developed on the basis of many years of experience in the manufacture of chargers.

1) Start-up/storage mode
In this mode, the current is automatically set to the maximum level for a short time, ensuring safe and fast battery charging (all battery manufacturers do not limit the charging current to 13.8 V). The battery can be in this mode for an unlimited time (buffer charging mode).

2) "Charge" mode
The main charging mode for all types of lead-acid batteries, including gel and AGM. The current is set from 0.1 to 0.2 C, where C is the capacity of the battery in A.Ch. Charge time 8-12 hours. This mode can be used for starting in winter (for this, the regulator needs to set the maximum current), but do not forget about the overheating of the battery (not higher than 45°C).

3) "Recovery" mode
It is used to charge the battery when normal modes are not charged, for example, at low temperatures, at deep discharges in traction mode, as well as for charging alkaline batteries. In this mode, you need to control the temperature of the battery.


The device has self-healing protection against:

- "polarity reversal"
- short circuit
- from high voltage in the 220 V network
- from overheating

Main technical characteristics:

- supply voltage: 150-250 V
- AC frequency: 50-60 Hz
- power consumption: no more than 950 W
- constant charge current: 1-30 A
- current in starting mode: 70 A
- type of rechargeable batteries: all types
- capacity of rechargeable batteries 7-500 A * h

End-of-charge voltage in mode:
- start/storage: 13.8V
- charge: 14.5 V
- recovery: 15.2V

High power with small dimensions and weight.

Пропоновані заміни

Leave your feedback or ask a question

Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.

The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.

If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав unknown

Последние просмотренные товары Посмотреть Последние...