With this, the device can measure the following parameters:
- direct and alternating current
- constant and alternating voltage
- resistance
- capacity
- frequency
- temperature
- chain continuity
- diode test
- duty cycle
The "Data Hold" function (holding of measurements) makes it possible to carry out current measurements by a non-contact method in hard-to-reach places where it is difficult to visually check the display readings.
Automatic selection of the measuring range provides additional comfort in work.
SPECIFICATIONS:
Display: LCD 3 3/4 digit f
constant voltage (DC): 0.4/4/40/400V (±0.8%), 1000V (±1.0%)
alternating voltage (AC): 4/40/400V (±1.0%), 700V (±1.2%)
direct current (DC): 400/1000A (±3.0%)
alternating current (AC): 400/1000A (±3.0%)
resistance, Ohm: 0.4/4/40/400/4000KΩ (±1.0%), 40 MOhm (±2.0%)
capacity, F: 4/40/400/4000nF (±3.0%)
frequency, Hz: 40 - 100000Hz (±2.0%)
relative duty cycle: 0.1 - 99%
temperature: -40 to 750°C (±1.0%)
continuity of the circuit: beep when resistance
¦ <50 Ohm
maximum diameter of the measured wire: 28 mm
power supply: 9V battery 6F22 "Krona"
dimensions: 250 x 99 x 43 mm
weight: 480 grams
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
