Multimeter MS8218

Изображение товара

Product description format_size zoom_out zoom_in

Digital multimeter Mastech MS8218 is a high-precision measuring instrument with automatic selection of measurement limits.
The device allows you to measure rms values ​​(TrueRMS) of AC and DC current, AC and DC voltage, resistance, capacitance, signal frequency and duty cycle.
The multimeter can be connected to a personal computer via the RS-232 port using the supplied cable. The software supplied with the multimeter will automatically calibrate the device and help to carry out measurements using a computer, save and process the obtained data.
The digital multimeter Mastech MS8218 has a large (44 x 77 mm) 5-digit LCD display with an indication of the maximum value of the measurement value of 50,000, with a graphical 50-segment scale for mnemonic display of measurement values ​​and with display of the unit of measurement. The display has the ability to backlight in poor visibility conditions.
With the MS8218 digital multimeter, you can check semiconductor diodes and ring electrical circuits. The results obtained can be fixed using the DATA HOLD function. The multimeter is powered by 6 AA batteries. "The power will automatically turn off after a certain time elapsed since the last measurement.
The delivery set of the Mastech MS8218 multimeter includes a set of probes, a cable for connecting to a personal computer with software, and a set of batteries.

LCD resolution: 5 (50,000)

DC voltage measurement range: 50mV - 1000V (±0.5%)

AC voltage measurement range: 50mV - 1000V (±0.5%)

DC current measurement range: 500 uA - 10 A (±0.15%)

AC current measurement range: 500 uA - 5 A (±0.75%), 10A (±0.15%)

Resistance measurement range: 500 Ohm - 5 MΩ (±0.1%), 50 MΩ (±0.5%)

Capacitance measurement range: 50 nF - 50 μF (±1%), 500μF/5000μF (±2%)

Measurement range of frequency of rectangular pulses: 5Hz - 5MHz (±0.06%) at pulse amplitude 2V - 5V

Sine pulse frequency measurement range: 10Hz - 200kHz (±0.006%) with sensitivity less than 100mV

Gain of transistors h21 - no

Duty Cycle Measurement: 10% - 90%

Selection of measurement limits: automatic and manual

Diode test and ringing of the circuit with a buzzer
Freezing measurement results DATA HOLD
Auto power off
Full overload protection
Overload indication "0L"
PC connection via RS-232
Automatic software calibration when connected to a computer
Low battery indication

Power supply: 6pcs batteries 1.5V AA
Weight with batteries: 600 g
External dimensions (hxwxd): 200 x 100 x 40 mm