У зв'язку зі святкуванням Нового Року ми працюємо за наступним графіком: • з 31.12.24(Вт) по 02.01.25(Чт) не працюємо • з 03.01.25(Пт) працюємо в звичайному режимі.
Інтерет-магазин приймає замовлення цілодобово 24/7 !
Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
Foil fiberglass, domestically produced in the 80s.
Manufactured according to TU16-503.161-83.
The foil thickness is 35 microns (real!).
Cutting to size 270 x 200 mm with an accuracy of ±2 mm (mostly “plus”).
Fiberglass sheets, foiled with copper foil, grades STF-1-35 (one-sided foil, foil thickness 35 microns) and STF-2-35 (double-sided foil, foil thickness 35 microns) are used in instrument making, radio engineering, electronics for the manufacture of printed circuit boards.
Allows mechanical processing.
Thickness 0.125-3.0 mm.
Resistance time to molten solder at t=260 C is at least 20 seconds. (1 class). Peel strength in the original state (for a strip width of 3 mm) is not less than 4.5 N (class 1).
Attention! Fiberglass sheets with dimensions larger than A4 format (300 x 200 mm) to avoid damage during transportation by transport agencies are sent in at least 2 pieces of the same sheet size (thickness and foil may be different).
Only this product is discussed here. Off topic comments will be deleted! Please follow the Commenting Rules.
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав
unknown
_250x281.jpg)
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
