Programmer TL866CS Mini Pro

Изображение товара

Product description format_size zoom_out zoom_in

This is one of the best professional programmers of microcircuits (memory chips). The device and the program currently support more 13143 microcircuits ! Nevertheless, the program is constantly updated by the manufacturer and new ones are added.
Designed for programming microcontrollers and repairing laptops, computer equipment, household equipment, auto chip-tuning, odometer adjustments. It is also suitable for radio amateurs who want to have at their disposal an inexpensive programmer with a wide list of supported microcircuits and advanced functions. The programmer has a self-test function. Simple and straightforward software.
The original program supports English and Chinese, but if you wish, on the network, on third-party sites, you can find the translated program into Russian.
  Software works under the operating systems Win 2000/Win XP/WIN 2003/WIN 2008/WIN Vista/Win7/Win8 both 32-bit and 64-bit (software higher than version 5.5)
The difference from the MiniPro TL866A programmer is that there is no ICSP connector for in-circuit programming.

Specifications:

• High speed programming via USB interface (up to 12 Mbit/s).
• Supports a wide range of microcircuits (more than 1300 items): 26 series , 27, 28, 29, 37, 39, 49, 50 parallel ROM, EPROM, EEPROM and FLASH from various manufacturers; series 24, 25, 35, 45, 85, 93, 95 serial EEPROM and FLASH from various manufacturers; (MCS-51); AVR - ATMEGA (ZIF socket uses parallel programming, which allows restoring Fuse bits), ATtiny, AT90XXX; MICROCHIP - PIC10, PIC12, PIC16, PIC18; FPGA (PLD, GAL, PAL). Performs functional testing of SRAM, TTL 54/74 and CMOS 40xx series microcircuits.
• The programmer uses ultra-low power consumption microcircuits. For example, the current consumption from the USB port during programming is 20 mA, and in read mode only 7 mA. There is no need for an external power supply for any chips.
• Voltages Vpp and Vcc for programmable microcircuits are independent and programmable in the ranges of 3.3-21V and 3.3-6.5V, respectively. Thanks to the multi-stage LC filter, voltage fluctuations are very small.
• Highly efficient independent overcurrent and overvoltage protection for each pin of the ZIF panel. The response time of the programmer protection system is less than 100 μs. This allows you to save the programmer and the programmable microcircuit if it is incorrectly installed in the panel.
• Convenient 40-pin ZIF panel with zero force. All programmable microcircuits, in a DIP package, are installed in the panel starting from pin 1.