The board allows prototyping of various electronic circuits easily and without soldering, and is reusable.
Resource - 10,000 component installations.
It is used for mounting accessories with hard leads with a diameter of 0.3-0.8 mm.
Contact material: phosphor bronze, nickel.
The board consists of 3 blocks of the main field, interconnected by grooves of 270 contact points each.
Power buses, 2 pcs, 20 points are located on the two outer sides of each block.
The contact field is fixed on a metal base plate.
In the upper part of the base there are holes for installing laboratory power terminals (3 pcs, multicolored, included).
Also, the board is equipped with self-adhesive rubber feet.
Characteristics:
-
board size: 138 x 86 x 9mm
-
number of contact points of the main field: 690 pcs (3 blocks, 23 x 5 x 2 contacts)
-
number of power bus contacts: 120 pcs (3 blocks of 2 x 5 x 4 contacts)