Recommended:
- for a strong and waterproof connection of wires and cables,
- in the power industry to restore the insulation of cables with voltages up to 69 kV
under heavy load or in high temperature conditions,
- in telecommunications to improve the insulation of connections isolated
with PVC tapes and cable gland seals,
- for the protection of outdoor telecommunication equipment (TV-SAT).
Characterized by:
- excellent electrical parameters (dielectric strength 44 kV/mm),
- improved physical properties,
- increased heat resistance (up to 120°C),
- high resistance to prolonged exposure to water,
- resistance to ozone,
- high strength, elasticity and stability of parameters,
- ease of use.
The tape does not contain any glue. After removing the protective layer, it is completely ready
to use. The tape should be applied with slight tension to ensure a snug fit. The tension leads to vulcanization of the contacting layers of the tape, which provides good electrical and waterproofing.
Technical data:
Dielectric Strength: 44 kV/mm (according to ASTM D149)
Breaking strength: 3.0 MN/m2 (according to BS903)
Elongation at break: 800% (according to BS903)
Resistivity: 1x1013 Ohm m (per ASTM D257)
Temperature range: -40°C to+100°C
![Self-vulcanizing electrical tape SCAPA-2547-19 [19mm x0.75mm 9.1m] rubber](/files/pic/lenta/scapa-2547-19-s.jpg)
![Self-vulcanizing electrical tape SCAPA-2547-19 [19mm x0.75mm 9.1m] rubber](/files/pic/lenta/scapa-2547-19.jpg)
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
